OOB module
| OOB module | Offset | Noise | Vdd | Idd | Target | Explain | Download |
| MMS213 | ±80mg | 200 ug/sqrt(Hz) | 5V | 150uA |
• 28.6 X 15 X 9 mm package • XYZ three-axis data output • Fast I2C slave module interface (400KHz) • Support 4.5V to 5.5V power output • Low power consumption: typical value< 150uA@5 V • Embedded up and down self-test function • On-chip mixed signal processing • Lead free RoHS compliant |
MMS213 is an acceleration module product of three-axis MEMS accelerometer applied to OOB, which is mainly used to detect and correct the vibration deviation when the machine is rotating | Download |
| MMS718 | ±30mg | 120 ug/sqrt(Hz) | 5V | 180uA |
• 28.6 * 15 * 9 mm package • XYZ three-axis data output • Fast I2C slave module interface • Support 4.5V to 5.5V power input • Typical value of power consumption 180uA • On-chip mixed signal processing • Lead free RoHS compliant |
MMS718 is a module based on three-axis MEMS accelerometer, which is used to detect the balance state of equipment (such as washing machine) in motion and at rest. The range and output frequency of the module can be configured through the configuration command, with flexibility and diversity, and can be applied to a variety of applications. | Download |
| MMW315 | ±80mg | 200 ug/sqrt(Hz) | 5V | 4mA |
• 28.6 x 15 x 9 mm package
• Three-axis acceleration data output • Serial full-duplex USART slave module interface • 5V power input • Typical value of power consumption 3.5mA@5V • On-chip mixed signal processing • Lead free RoHS compliant |
The MMW315 module is highly integrated by a digital control unit, vibration sensor and peripheral passive devices, which is used to detect the balance state of some equipment (such as washing machine) in motion and at rest. | Download |
返回列表页
